PasswordOne

PasswordOne

Bonjour Shyners,

Comme tu as 2 Windows installés sur C: et D:, avec l'utilitaire Offline NT Password & Registry Editor, à l'étape 2) tu dois avoir 2 partitions trouvées.
Il faut que tu sélectionnes l'autre partition puis ensuite tu poursuis la procédure. Wink

PasswordOne

Depuis la FAQ d'Ophcrack :
No partition containing hashes found
There are a few reasons while you could get this message from the launch.sh script. But first you should determine which partitions are mapped to your Windows partition. On Linux, harddisks are mapped to /dev/hda, /dev/hdb, ... for IDE disks or /dev/sda, /dev/sdb, ... for SCSI or SATA disks. Then you should add a number after in order to get the "path" to your partition. There you could get something like /dev/hda2 for the second partition on the first IDE drive, or /dev/sdc5 for the fifth partition of the third SATA drive.

One way to determine on which partition is your Windows partition (if you don't know) is to enter the command "fdisk -l". It will return the list of drives and partitions of your computer and their type. Look for a bootable FAT32 or NTFS partition usually.

Then determine if this partition has already been mounted by Linux at start. It generally creates a corresponding directory in /mnt, i.e. /dev/sdc5 is mounted in /mnt/sdc5. You can enter the command "df" to see if you partition appears in the list which means that it is mounted.

If your partition is already mounted, it means that ophcrack was not able to find your Windows directory. So start ophcrack by entering the command "ophcrack" and use the "Load from encrypted SAM" menu entry to navigate to your /mnt/.../*Windows directory*/system32/config directory.

If you partition is not mounted, enter the following commands:

PasswordOne

Shyners,

Tu utilises la version d'Ophcrack LiveCD.
Ensuite tu fais un clic droit et tu choisis xterm.
Tu tapes la commande fdisk -l qui te liste l'ensemble des disques durs comme par exemple :

PasswordOne

Bonjour Shyners,

Il suffit d'aller sur le site à l'adresse ici. Wink

PasswordOne

Les tables sont incluses dans le CD d'Ophcrack LiveCD.
Elle se trouvent sous ophcrack\tables

PasswordOne

Shyners,

Depuis Ophcrack LiveCD, tu fais un clic droit et tu choisis xterm.
Ensuite tu tapes la commande ophcrack.
Quand ophcrack est lancé, tu cliques sur le bouton Load et le menu from encrypted SAM.
Tu sélectionnes le dossier mnt, hda2 (ton disque de la session C) , Windows, System32, config puis tu cliques sur le bouton Choose.
Tu devrais voir apparaître la liste des comptes.
Puis sur le bouton Tables suivi d'Install. Les tables sont sous le dossier ophcrack à la racine."